CFD Analysis of an Enclosure Cooling System
The study of airflow and thermal management within electronic enclosures is crucial to ensuring reliable operation and preventing overheating. In…
Robot Joint Motor Analysis: Air-Gap Tolerance
A compact robot-joint motor study examining how rotor alignment affects torque smoothness and radial magnetic loads. Original CAD and Ansys Maxwell analysis.
Vacuum Chamber FEA: Lid Deflection and Stiffening Ribs
A vacuum lid can remain elastic while bending enough to affect the sealing interface. This study compares a flat cover with an integrally stiffened alternative.
Piping Thermal Stress FEA: When a Support Becomes a Restraint
A support that carries pipe weight can also block thermal growth. This example examines how one axial stop changes loads transmitted to connected equipment.
Holding Magnet Analysis: Contact Gap and Keeper Thickness
A 40 mm holding-magnet study showing how contact gap and keeper thickness affect pull force, with verified Maxwell results.
Solenoid Magnetostatic Analysis: Flat vs. Tapered Poles
A flat-versus-tapered pole comparison for a 24 V solenoid. Maxwell predicts 49.8% more pull at 2 mm stroke with the taper, at the cost of lower holding force.
Trailer structural analysis
Trailers are expected to sustain many load cases such as static weight, vibrational and crash. Apex CAE has extensive experience…
Wind Turbine Performance
The CFD simulation provides a comprehensive visualization of wind turbine aerodynamic behavior. The turbine demonstrates effective wind energy capture with…
Spray Evaporation CFD: Cooling, Wall Collection and Carryover
Compare injection positions in a process duct and see how evaporation, wall collection and liquid carryover change.
Filter Vessel CFD: Inlet Distribution and Partial Blockage
Compare direct and diffuser inlets in a representative filter vessel, including uneven porous-bed resistance.
Viscous Mixing CFD: Impeller Height and Tank Circulation
A 50 L shear-thinning mixer example showing how impeller height changes circulation, using original CAD, native Fluent contours and tracer transport.